Spill response kits
Universal, oil-only and chemical spill kits in wheeled bins, bags and cabinets, sized to the credible spill volume in each area.
06 — HSE Category
Spill Control and Environmental Protection
Containment at the source, protection of the drain and a stocked response kit — in that order.
Overview
Spill control works best as containment rather than clean-up: bunding and drip trays under the source, drain protection downstream, and a response kit close enough to be used in the first minutes.
MTT supplies spill and environmental protection equipment from Section C of its catalogue, sized to the volumes actually handled in each area and to the substances involved.
Equipment and solutions
MTT supplies the following equipment groups within this category. Exact models, classes and ratings are confirmed against your requirement at quotation stage.
Absorbents
Pads, rolls, socks, pillows and granular absorbents in universal, oil-only and chemical grades.
Booms and barriers
Absorbent and containment booms for water surfaces, hard standing and perimeter control.
Drip trays and bunding
Drip trays, spill decks, bunded shelving and workstation containment under transfer and storage points.
Drum and IBC containment
Spill pallets for drums and IBCs, dispensing stations and pump trays for transfer operations.
Foldable containment berms
Portable berms for vehicle, generator and equipment parking, refuelling and maintenance areas.
Drain protection
Drain covers, seals, plugs and inflatable stoppers to isolate a drain before a spill reaches it.
Disposal and PPE support
Contaminated-waste bags, drums, labels, gloves and eye protection for the people carrying out the response.
Typical applications
This category is most often specified for the following environments across Bahrain and Saudi Arabia.
- Fuel and chemical storage areas
- Workshops and vehicle maintenance bays
- Generator and transformer compounds
- Ports, jetties and marine operations
- Manufacturing and process transfer points
- Warehouses handling hazardous goods
Selection and specification considerations
Size to the credible spill
Kit capacity is set by the largest container that can realistically fail in that area, not by a standard product size.
Right absorbent grade
Oil-only absorbents repel water for outdoor and marine use; chemical grades are needed for aggressive substances; universal suits general workshop use.
Protect the drain first
Drain covers stop a small incident becoming a reportable one. They belong at the drain, not in a central store.
Containment beats response
Trays, spill pallets and berms under the source prevent most incidents from ever needing a kit.
Restocking
A used kit is an empty kit. Restock packs and a named owner keep it ready.
Waste handling
Contaminated absorbent is waste and needs a labelled, compliant disposal route agreed in advance.
Standards, classes, ratings, inspection intervals and availability are confirmed from manufacturer documentation at quotation stage. A product name alone does not establish compliance with any particular requirement.
MTT lifecycle support
- 01
Supply of catalogued items against a documented requirement, delivered to your site in Bahrain or Saudi Arabia.
- 02
Scheduled inspection of equipment against manufacturer guidance and your own service requirements.
- 03
Practical user training so equipment is worn, used, stored and checked correctly.
- 04
Ongoing servicing, spares and replacement so safety provisions stay in date.
Procurement checklist
- Identify substances and volumes handled in each area
- Size kits to the largest credible release
- Select the absorbent grade for the substance and surface
- Place drain protection at the drains, not in a store
- Put trays, spill pallets or berms under every transfer point
- Agree the contaminated-waste disposal route
- Assign restocking responsibility after every use
Frequently asked questions
Request the HSE catalogue or a quotation
Tell us the tasks, hazards and quantities involved and MTT will send the catalogue listing together with pricing for your requirement.
Related HSE categories
05
Fire Protection and First Aid
Extinguishers, fire blankets, hose reels and cabinets, AEDs, first-aid, burn and trauma kits, eyewash and emergency shower stations.
Explore Fire protection & first aid →01
Personal Protective Equipment
Head, eye and face, hearing, respiratory, hand, body, foot and fall-protection equipment for industrial, construction and oil & gas environments.
Explore PPE →04
Gas Detection and Confined-Space Equipment
Portable and area gas detection, multi-gas monitors, calibration and docking, entry-control kits, ventilation and breathing apparatus.
Explore Gas detection & confined space →