Network Infrastructure & Data Centres
Core switching, routing, structured cabling, racks, UPS and cooling — engineered, tested and documented.
Engineering guidance from the MTT team.Practical, vendor-neutral guides on planning and operating ICT, ELV and security infrastructure in Bahrain and Saudi Arabia.
Buying & specification guides
For teams preparing a budget, writing a specification or comparing proposals.
CCTV System Cost & Budget Guide for Bahrain
What actually drives CCTV cost: coverage objectives, camera and lens choice, retention and storage, VMS licensing, cabling and PoE, control room, UPS, cybersecurity, commissioning, maintenance and a buyer checklist.
Read the guide →Access Control & Gate Barrier Specification and Budget Guide
Doors and vehicle lanes, credentials from cards to biometrics, UHF and ANPR, barrier duty cycle, safety devices, fail-safe behaviour, controllers and licensing, civil and power works, testing and maintenance.
Read the guide →ICT & ELV Annual Maintenance Contract Guide
Preventive versus corrective scope, asset registers and criticality, inspection frequency, SLA response categories, spares strategy, remote monitoring, firmware and cybersecurity, reporting, exclusions and an AMC evaluation checklist.
Read the guide →HSE & PPE Procurement Guide for Bahrain
Hazard-led PPE selection, electrical safety and lockout-tagout, rescue equipment, gas detection and confined space, fire and first aid, spill control, AI-assisted safety monitoring, inspection and training.
Read the guide →Structured Cabling Specification & Cost Guide
Choosing between Cat6, Cat6A and fibre, outlet density and containment, MDF/IDF room planning, PoE heat, labelling conventions, certification and warranty, and the site conditions that really move the price.
Read the guide →UPS Sizing & Runtime Guide
Assessing real load rather than nameplate, choosing a topology, runtime versus generator handover, battery chemistry and replacement cycles, redundancy and bypass, and load-bank acceptance testing.
Read the guide →Technical planning guides
For engineers and managers designing, troubleshooting or expanding infrastructure.
Enterprise Wi-Fi: Common Problems and What Actually Causes Them
Coverage versus capacity, interference and channel planning, roaming and client behaviour, cabling and PoE, VLANs and guest access, warehouse and outdoor conditions, point-to-point links and when a survey is needed.
Read the guide →Gate Barriers, ANPR & Vehicle Access Control — Selection Guide
Boom barrier types and duty cycle, safety loops and photocells, UHF/ANPR/card credentials, integration with CCTV and access control, fail-safe behaviour, civil and power requirements, maintenance and common specification mistakes.
Read the guide →Enterprise Wi-Fi & Network Infrastructure Guide for Bahrain
Site surveys and RF planning, indoor and outdoor wireless, wireless generations compared, point-to-point and microwave links, switching, firewalls and VLANs, guest access, monitoring and a full survey checklist.
Read the guide →Structured Cabling, Network Racks & Fibre Guide for Bahrain
Cat6 and Cat6A, fibre backbones and types, connectors, termination and splicing, racks and cable management, MDF/IDF planning, labelling, testing and fault diagnosis, and a buyer checklist.
Read the guide →How to Plan an Enterprise CCTV System in Bahrain: An Engineering Checklist
A 12-point checklist covering operational objectives, site survey, camera and lens selection, storage, networks, VMS architecture, cybersecurity, control rooms, UPS, governance, commissioning and maintenance.
Read the guide →Fibre Optic Testing & OTDR Guide
Single-mode and multimode selection, loss budgets, Tier 1 versus Tier 2 certification, reading an OTDR trace, launch and tail cords, end-face inspection, and the acceptance evidence a client should insist on.
Read the guide →Server Room & Data Centre Planning Guide
Room selection and floor loading, rack layout and aisle containment, cooling and power redundancy, PDUs and dual feeds, earthing, fire and environmental monitoring, physical security and handover documentation.
Read the guide →Intrusion Alarm System Selection Guide
Risk-led zoning, detector technologies and where each suits, false-alarm causes and mitigation, panel capacity, wired versus wireless, verification with CCTV, monitoring paths and commissioning tests.
Read the guide →PA/GA & Emergency Communication Design Guide
PA versus general alarm, intelligibility as the design objective, acoustic zoning and speaker selection, 100V line loading, redundancy and standby power, fire-system integration and coverage verification.
Read the guide →