Equipment specified for the wrong area
Standard enclosures and cameras placed in classified or corrosive areas, then replaced early — or worse, becoming a compliance problem in their own right.
ICT, ELV, Security & Safety Systems for Oil, Gas and Energy Facilities
MTT delivers hardened surveillance, perimeter protection, communication, network and safety infrastructure for energy facilities in Bahrain and Saudi Arabia — designed for classified areas, long distances and documented handover.
Energy sites combine three difficult conditions at once: hazardous-area classification, distances that defeat ordinary cabling, and a documentation standard that ordinary building work never has to meet.
MTT (My Telecom Technology) engineers ELV and ICT scopes for these environments — from thermal and fixed cameras on a perimeter, to fibre backbones between remote buildings, to PA/GA and emergency communication that has to work on the worst day the site ever has.
The architecture is built around distance and criticality. Single-mode fibre backbones connect the control room to substations, tank farms, gatehouses and remote plots, with point-to-point wireless as a fallback where a fibre route is not practical. Perimeter detection, thermal and fixed cameras and gate ANPR converge on the control room over a segmented network, alongside PA/GA and emergency communication zoned to plant layout. UPS and battery-backed distribution protect the control room, recorders and communication racks so the systems that matter most in an emergency are the ones least dependent on mains continuity.
What we are asked to solve
The operational problems behind most oil, gas & energy enquiries.
Perimeters that are long, dark and unmanned
Fence lines and remote plots where conventional cameras give nothing usable at night and detection is left to patrols.
Distance and connectivity
Remote wellheads, tank farms, gatehouses and substations far beyond copper distance, with no resilient path back to the control room.
Contractor and vehicle control
High volumes of contractor traffic and deliveries through gates that were never designed for the throughput or the record-keeping now expected.
Emergency communication gaps
Areas where an announcement is not intelligible, or where the PA/GA scope was never verified after later plant modifications.
Documentation that does not match reality
Legacy installations without accurate as-builts, so every modification begins with an investigation.
Tender responses that cannot be compared on equal terms
Bids priced against different area-classification assumptions and different certification for the same nominal scope, so the technical comparison has to happen before the commercial one means anything.
MTT capabilities in this sector
Systems we design, install, test and maintain.
CCTV & video surveillance
Fixed, PTZ and thermal camera design for plant areas, perimeters and gates, with retention and control-room review.
View service →Perimeter & intrusion detection
Detection along fence lines and around critical assets, integrated so an alarm brings up the right camera view.
View service →Fibre-optic networks
Single-mode backbones between remote buildings, substations and gatehouses, terminated, tested and documented.
View service →Network infrastructure
Switching, segmentation and resilient links, including point-to-point wireless where a fibre route is not practical.
View service →PA/GA & emergency communication
Public address and general alarm coverage, with intelligibility verified by test rather than assumed from a layout.
View service →Gate barriers & vehicle access
Barriers, ANPR and long-range credentials for contractor and delivery traffic, with safety detection commissioned and recorded.
View service →Access control
Controlled entry to control rooms, substations and restricted plant areas with auditable records.
View service →UPS & critical power
Protected power for control rooms, recorders and communication equipment.
View service →Control room servers & storage
Recording servers, VMS hosts and NAS storage specified for continuous plant-area recording and control-room redundancy.
View service →Annual maintenance contracts
Planned inspection and corrective support that fits turnaround and shutdown planning.
View service →How the work is delivered
Survey to maintenance, documented at every step.
- Step 01Site survey
An engineer attends site, records existing infrastructure, distances, containment, power and constraints, and agrees the operational objective with the people who will use the system.
- Step 02Design
Layouts, schematics, equipment schedules and a bill of quantities are produced so the scope and the assumptions behind it are visible before anything is ordered.
- Step 03Supply
Equipment is procured against the approved design, with lead times and any substitution agreed in writing rather than decided on site.
- Step 04Installation
MTT field teams install to the approved drawings, with structured containment, labelled cabling and coordination around live operations and permit requirements.
- Step 05Testing & commissioning
Cabling is tested, systems are configured and functional tests are witnessed and recorded so the delivered performance is documented, not assumed.
- Step 06Documentation
As-built drawings, schedules, test results, configuration records and asset lists are handed over as the basis for future changes and maintenance.
- Step 07Training
Operators and site technicians are trained on day-to-day use, routine checks and the correct escalation route.
- Step 08Maintenance
Preventive and corrective cover under an annual maintenance contract keeps the system supported, with an agreed scope and spares position.
Area classification first
Equipment selection follows the site's hazardous-area classification and the client's own engineering standards. Where a scope touches a classified area, MTT works to the requirement given by the operator and its consultant.
Distance-led design
Backbone routes, fibre types and wireless links are decided from measured distances and line of sight, not from a nominal site plan.
Deliverables at handover
OTDR fibre test results, area-classification and certification records for every device installed in a classified zone, PA/GA intelligibility test results, as-built drawings, configuration backups and an asset register — the pack an operator's engineering department will file against the project record.
Lifecycle and AMC coverage
Maintenance scopes are built around turnaround and shutdown planning: battery and UPS load testing, PA/GA tone and zone verification, perimeter detector testing and fibre link health checks, with corrective response times agreed against the criticality of each system.
Documentation to project standard
Cable schedules, as-builts, test records and configuration backups are produced in the format the project requires.
Who we usually work with
The people involved in this decision.
- HSE managers
- Emergency communication coverage, safety detection, gas-detection equipment and rescue provisions.
- Security managers
- Perimeter detection, camera coverage at night, gate control and evidence retention.
- Operations managers
- Work that fits shutdown and permit regimes without adding operational risk.
- Engineering & project teams
- Compliance with site standards, correct area-appropriate equipment and complete handover documentation.
- MEP / ELV consultants and contractors
- A subcontract partner who can price against specification, coordinate interfaces and deliver testable results.
- Procurement teams
- Clear technical compliance statements and a scope that can be evaluated against the tender.
Frequently asked
Oil, Gas & Energy — common questions.
Related MTT engineering guides
Buying guide
CCTV System Cost & Budget Guide →
Cost drivers from camera selection to retention, cabling, control room and maintenance.
Technical guide
Fibre-Optic Network Testing & OTDR Guide →
How backbone fibre between remote buildings and substations should be tested and documented.
Technical guide
PA/GA & Emergency Communication Design Guide →
Zoning, intelligibility and verification for public address and general alarm systems.
Technical guide
UPS Sizing & Runtime Budget Guide →
Protecting control-room and communication equipment through a mains interruption.
Buying guide
ICT & ELV Annual Maintenance Contracts →
Preventive versus corrective scope, response categories, spares and reporting.
Other sectors we work in
Industrial & Manufacturing
MTT designs, installs and maintains the cabling, networks, surveillance, access control and safety monitoring that produ…
View sector →Warehousing & Logistics
MTT delivers the wireless coverage, surveillance, vehicle access and cabling that distribution sites in Bahrain and Saud…
View sector →Commercial Buildings & Offices
MTT delivers the cabling, networks, security, communication and meeting-room technology that commercial buildings in Bah…
View sector →Let's start with your site.
Tell us what the site does and what is not working. An MTT engineer will arrange a survey or prepare a budgetary quotation from the information you provide.
Enquiries are handled through the protected MTT enquiry form. Your details are used only to respond to your request.